Marine System Oil Dana Lubes – Made in UAE
Technical Data Sheet of Marine System Oil Dana Lubes Made in UAE
Technical Data Sheet of Marine System Oil Dana Lubes – Made in UAE
INTRODUCTION
DANA MARINE SYSTEM OILS are marine oils especially designed for the crankcase lubrication of slow speed 2 stroke cross head Diesel engines & also suitable for plain bearings of turbochargers, shaft bearings, stern tube and seals. The formulation has maximum anti-wear properties, good rust protection in the presence of salt water, and excellent water separation characteristics.
APPLICATIONS
DANA MARINE SYSTEM OILS are designed for Crankshaft lubrication, cooled pistons & Shaft bearing lubrication. Primarily recommended for use as system oil in late model, high-output, crosshead diesel engines, especially those engines employing the system oil for piston cooling. It will prevent or reduce deposit formation in the piston cooling spaces, thus maintaining piston cooling efficiency and reducing the incidence of piston top burning and piston crown cracking.
PROPERTIES
DANA MARINE SYSTEM OILS are formulated from high quality paraffinic base oils along with a balanced additive system to provide excellent protection even for the severe operating conditions of the latest design, high-output cross- head marine diesel engines. In addition, the alkalinity is sufficient to neutralize crankcase contaminations or acidic combustion products in a less demanding four-stroke trunk piston diesel engine running on distillate fuel.
PRODUCT BENEFITS
Very good detergency level.
Very good thermal stability.
Very good anti-oxidant characteristics.
Excellent anti-rust and anti-corrosive properties.
Excellent deposit control of oil-cooled piston under crown
Excellent capacity for water separation.
Excellent capacity for insoluble separation.
Good anti-wear properties.
High resistance to foaming.
Clean crankcase
TECHNICAL PROPERTIES
M-SYS 20 | M-SYS 30 | M-SYS 40 | |
SAE Viscosity Grade | 20 | 30 | 40 |
Product code | 12685ML | 12686ML | 12687ML |
Density at 15°C, g/ml, ASTM D4052 | 0.890 | 0.890 | 0.895 |
Kinematic Viscosity at 40°C, mm²/s, ASTM D445 | 70 | 105 | 150 |
Kinematic Viscosity at 100°C, mm²/s, ASTM D445 | 8.8 | 11.61 | 14.7 |
Viscosity Index, ASTM D2270 | 97 | 97 | 97 |
Flash Point(COC), °C, ASTM D92 | >220 | >220 | >230 |
Pour Point, °C, ASTM D97 | -6 | -9 | -9 |
Total Base Number, mg KOH/g, ASTM D2896 | 6 | 6 | 6 |
Sulphated Ash, %wt, ASTM D874, max | 0.73 | 0.73 | 0.73 |
#MarineOils
#MarineOilsMiddleEast
#MarineOilsGCC
#MarineOilsUAEExports
#MarineOilsUAESupplier
#UAESuppliers
#MarineOilsWholesale
#MarineOilsUAEManufacturing
#UAEManufacturing
#تصنيع_زيوت_بحرية_الإمارات
#FabricaciónAceitesMarinosUAE
#FabricationHuilesMarinesUAE
#LubricantesMarinos
#AceitesMarinos
#زيوت_بحرية
#زيوت_المركبات_البحرية
#LubrifiantsMarins
#HuilesMarines
#EntretienNaval
#MarineOilsProduction
#SustainableManufacturing
#UAEIndustry
#MarineSystemOil
#MarineLubricants
#2TOutboardOil
#MarineOutboardOil
#TwoStrokeOil
#4TMarineEngineOil
#FourStrokeOil
#MarineEngineLubrication
#OutboardEngineOil



