DANA UNINHIBITED NAPHTHENIC TRANSFORMER OIL – MSDS
DANA UNINHIBITED NAPHTHENIC TRANSFORMER OIL MSDS (MATERIAL SAFETY DATA SHEET)
HS CODE: 27101971
1.IDENTIFICATION OF SUBSTANCE/PREPARATION AND COMPANY
Product Name : DANA UNINHIBITED NAPHTHENIC TRANSFORMER OIL
Company Identification :Dana Lubricants Factory LLC(Division Of Dana Group)
Plot no 283,Opposite Hamriya Free Zone Phase 2,Al Jurf Industrial Area, Ajman
Telephone : 00971-4-2217273 Fax : 00971-4-2215940
2.COMPOSITION / INFORMATION ON INGREDIENTS
Composition : DANA UNINHIBITED NAPHTHENIC TRANSFORMER OIL
Chemical composition: Synthetic and paraffinic solvent highly refined base stocks blended with additive packages.
The composition of this product is proprietary information. In general, the product does not contain any component that may be a significant health and safety hazard as long as normal precautions in greases are observed and good standards of industrial and personal hygiene are maintained.
3.HAZARDS IDENTIFICATION
According to experience , product is considered to be harmless to health if handled correctly
4.FIRST & MEASURES
General Information : Remove contaminated clothing immediately, to be disposed of or washed before reuse.
Inhalation : If inhaled, provide fresh air, warmth, rest and medical advice if necessary.
Skin Contact: Clean areas of skin affected with soap and copious water. If necessary seek medical advice.
Eye Contact : In case of contact with eyes, rinse immediately with plenty of water until irritation subsides.
Ingestion : Allow the patient to vomit on his own accord. Give copious water to drink and seek
medical help if necessary.
5.FIRE FIGTING MEASURES
Extinguishing Media: To suit local surroundings (e.g. water spray, carbon dioxide foam, chemical powder).
Special Exposure : Hazard Decomposition products released in a fire should be considered as probably harmful if inhale (refer to Stability and Reactivity section).
Protective Equipment :Wear self-contained breathing apparatus
6.ACCIDENTAL RELEASE MEASURES
Methods for Cleaning Up Take up with absorbent material, eg sand, sawdust and dispose of as prescribed.
Do not allow to get into waste water or waterways; if this occurs, inform the relevant
authority at once .
7.HANDLING & STORAGE
Advice on Safe Handling : Handle in accordance with good hygiene and safety practice. Avoid temperatures > 65 0C
Advice on Protection against Fire &Explosion :N/A
Storage Conditions – Ensure adequate ventilation of storage area. Keep container tightly closed, cool (< 650C) and dry
8.EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Controls : Monitoring of the workplace should be considered in accordance with EH40 (or equivalent ) Controls. LTEL (8 hour TWA): 5 mg/m 3 (EH40, 1998)STEL (15 min): 10 mg/m 3 (EH40, 1998)
OES data for oil mist, mineral .In addition the Reciprocal Calculation Procedure (RCP) for hydrocarbons should be considered (EH40, 1998)
Engineering Controls : Ensure adequate ventilation of working area eg Local Exhaust Ventilation.
Personal Protection : Observe normal safety standards for handling chemicals. Avoid inhalation of vapour. Avoid contact with skin and eyes. Wear personal protective equipment appropriate for the task eg gloves, safety goggles, respirators (eg if ventilation is inadequate), appropriate overalls.
9.PHYSICAL& CHEMICALPROPERTIES
| CHARACTERISTICS | TEST METHOD | SPECIFICATION |
| 1-Function: | ||
| Colour | ASTM D 1500 | — |
| Kinematic Viscosity @40 °C mm2/sec @ (-) 30°C mm2/sec | ISO 3104 | Max. 12 |
| ISO 3104 | Max. 1800 | |
| Pour Point °C | ISO 3016 | Max. (-) 40 |
| Water Content (PPM) | IEC 60814 | Max. 30 mg/kg for bulk supply Max. 40 mg/kg for supply in Drum |
| Breakdown Voltage | IEC 60156 | Min. 30 kV as delivered Min. 70 kV after lab treatment |
| Density @20°C KG/dm3 | ISO 3675 OR ISO 12185 | TBR |
| Density @29.5C KG/dm3 | ISO 3675 OR ISO 12185 | — |
| Dielectric Dissipation Factor @ 90°C & 40 to 60 Hz | IEC 60247 OR IEC 61620 | Max. 0.005 |
| Particle Content | ISO 60970 | No General Requirement |
| 2-Refining/ Stability: | ||
| Clear, free from sediment & | ||
| Appearance | VISUAL | Suspended matter |
| Acidity | IEC 62021-1 OR IEC62021-2 | Max. 0.01 mg KOH/gm |
| Inter Facial Tension MN/m | EN 14210 OR ASTM D971 | Min. 40 |
| Total Sulphur Content | IP 373 OR ISO 14596 | No General Requirement |
| Corrosive Sulphur | DIN 51353 | Non Corrosive |
| Potentially Corrosive Sulphur | IEC 62535 | Non Corrosive |
| DBDS(Dibenzyldisulphide) mg/kg | IEC 62697 | Not Detectable(<5mg/kg) |
| (U) Uninhibited Oil; Not Detectable | ||
| Inhibitors of IEC 60666 | IEC 60666 | (<0.01%) |
| Metal Passivator Additives mg/kg | IEC 60666 | Not Detectable |
| Other Additives | — | — |
| 2 Furfural Content mg/kg/gm | IEC 61198 | Not Detectable |
| Stray Gassing | See 6.22 | No General Requirement |
| 3-Performance: | ||
| IEC-61125:1992 (METHOD C) | ||
| Oxidation Stability @120°C, 164 HRS | TEST DURATION; UNINHIBITED OIL: 164 Hrs | |
| A) Total Acidity mg KOH /gm | 1.9.4 of IEC 61125:1992 | Max. 1.2 |
| B) Sludge % | 1.9.1 of IEC 61125:1992 | Max. 0.8 |
| C) DDF @ 90 °C | 1.9.6 Of IEC 61125:1992 | Max. 0.5 |
| Gassing Tendency | Amendment 1(2004) +IEC 60247 | No General Requirement |
| ECT | IEC60628:1985, METHOD A | No General Requirement |
| 4- Health, Safety and Environment: | ||
| Flash Point | ISO 2719 | Min. 135°C |
| PCA Content % | BS-2000 PART 346 | Max. 3 .0% |
| PCB Content mg/kg/gm | IEC-61619 | Not Detectable |
| Carbon Type Analysis CA % CP % CN % | 4.0 to 12.0 | |
| FTIR | Max. 50.0 | |
| Min. 42.0 |
10.STABILITY & REACTIVITY
Stability : N/A
Thermal Decomposition : Not determined
Conditions To Avoid: N/A
Material To Avoid : N/A
Hazardous Reactions : The product does not undergo hazardous polymerisation.
Hazardous Decomposition products : Oxides of carbon, aldehydes, ketones, and of hydrogen sulphide plus combustion products of nitrogen and sulphur.
11.TOXICOLOGICAL INFORMATION
Acute Toxicity No acute toxicological data are available.
LD 50 rat (oral): N/A
LD 50 rat (i.v.): N/A
Dermal Compatibility N/A
Mucous Membrane Compatibility : N/A
12.ECOLOGICAL INFORMATION
Ecotoxicology : Eco toxicological data are not available.
Further Ecological Information: N/A
Further Information : The product must not enter ground or waste water. If this occurs, inform the local
authority at once. Calcium content: approx. 0.229% by mass (atomic absorption)
13.DISPOSAL CONSIDERATIONS
Advice on Disposal: In accordance with national and local authority regulations, eg special waste or
incineration after consultation with the operators.
Contaminated Packaging : Treat emptied containers in the same way as the product, or if possible wash out
thoroughly and recycle.
14.TRANSPORT INFORMATION
IATA approved
Department of transportation Classification: Not hazardous by US DOT Regulations.
Dot Proper Shipping Name: Not Applicable
Other Requirements: Not Applicable
15.REGULATORY INFORMATION
Classification & Labelling : Product is not classified in accordance with the Chemical (Hazard Information and
Packaging for Supply Regulations (CHIP 97).
Risk Phrases :N/A
Safety Phrases : N/A
16. OTHER INFORMATION
This information is based on our present state of knowledge and is intended to describe our products from the point of view of the safety requirements. It should not be construed as guaranteeing specific properties.
FOR DANA LUBRICANTS FACTORY LLC